Research Group 2401

 

Optimization-Based Multiscale Control of Low-Temperature Combustion Engines

  Logo FOR 2401
 
  Forschergruppe 2401 Kick-off-Meeting Copyright: RWTH Aachen | VKA

Due to the growing global demand for energy, fossil fuels will remain indispensable for the foreseeable future. This affects, among other things, the transport sector, for which area-wide availability and a high energy density of the energy sources used are important. Against the background of the high energy density and good storage possibilities, the use of liquid fuels for mobile drive systems appears to play an essential role for a long time to come, even if their use can be reduced by increasing electrification, for example through hybrid vehicles. In connection with an increasing scarcity of resources and rising environmental pollution, economic and ecological aspects of energy supply are increasingly coming to the fore. The combustion of fossil fuels, which consist mainly of hydrocarbons, produces pollutant emissions such as nitrogen oxides (NOx), carbon monoxide (CO), unburned hydrocarbons (uHC) and soot, which contribute significantly to urban and regional air pollution. In addition, the greenhouse gas CO2 is produced, which leads to changes in the global climate. The reduction of pollutant emissions and greenhouse gases is an important social goal.

In the field of engine combustion, innovative combustion processes are currently being researched to achieve this goal. On the one hand, these processes meet the existing requirements for performance and comfort, and on the other hand, they avoid the generation of pollutant emissions by means of internal engine technology while maintaining the highest possible efficiency. In particular, combustion processes with low-temperature combustion (NTV) have proven to be very promising. This applies both to gasoline engines (Gasoline Controlled Auto Ignition, GCAI) and to diesel engines (Premixed Charge Compression Ignition, PCCI). Both combustion processes are characterized by a high degree of homogenization of the fuel-air mixture and combustion initiated by self-ignition, which takes place without a pronounced flame front. The homogenization with simultaneously lower peak temperatures leads to the desired significantly reduced emissions at a very high degree of efficiency. While the concept of NTV offers significant advantages with respect to efficiency and emissions, the demanding problems that arise have not yet been sufficiently solved for a technical realization.

 

Structure of the research group

Thematic and methodical structure of the research group Copyright: RWTH Aachen | VKA

The thematic and methodological linking of the subprojects and the associated interdisciplinary
Cooperation is crucial for the realization of the highly complex problem. For example, the planned optimization-based control systems, which meet the tough requirements for real time, can only be developed if expertise from the fields of numerical processes, controller development, combustion engineering and combustion chemistry is combined. The close cooperation between the research institutions is supported by the extensive networking of the subprojects.

  Workshop Copyright: RWTH Aachen | VKA

Workshops on the various topics are held in regular sections. The focus, as shown here in the photo, is on personal exchange in small groups. As part of the summer campus of the technical faculty of the Albert-Ludwigs-University of Freiburg, the optimization tools CasADi and acados, which are developed at the Institute for Microsystems Technology at the University of Freiburg, were presented to IRT PhD students and the junior professorship for mechatronic systems on the internal combustion engine at RWTH Aachen University.

 
 
 

Objective

The aim of the research group is to make the promising NTV in combustion engines technically usable with the help of innovative control concepts. To this end, the research group is pursuing a novel interdisciplinary approach from the fields of chemistry, combustion and control engineering. Currently researched methods for NTV control can be classified as cycle-based control concepts. The established control systems use information from previous cycles to determine cycle-integral surrogate parameters that serve as control variables. On this basis, the current manipulated variables are calculated on a cycle-to-cycle basis. With cycle-based control, process control is possible in principle, but only in a very limited characteristic diagram range, which is not sufficient for a technical application.

Contact

Name

Julian Bedei

Research Associate

Phone

work
+49 241 80 48244

Email

E-Mail

Contact

Name

Patrick Schaber

Research Associate

Phone

work
+49 241 80 48151

Email

E-Mail
  Cylinder pressure profile GCAI Cylinder pressure profile GCAI (stationary); above: without bifurcative system dynamics; below: with bifurcative system dynamics

The multi-scale control approaches, that have to be newly developed within the framework of FOR2401, are to be supplemented by additional intra-cyclical information, which appears to be indispensable for robust control of NTV. The addition of intra-cyclic information makes it possible to take into account not only the dynamics occurring from cycle to cycle, but also the decisive effects of NTV combustion processes, which take place on a much smaller time scale than that of a combustion cycle. Altogether, multi-scale control consists of two approaches which are combined with each other. a) On the one hand, a finer temporal resolution of the process course of the cycle is adjusted under consideration of the non-linear process behavior. Thus, considerably more information from the combustion process is used to characterize and control the combustion. The investigations go up to the limit case that the complete combustion process is (quasi-)continuously controlled (combustion process control). The planned combustion process control allows the utilization of completely new degrees of freedom, which are currently not available. The cycle rate of the combustion process control remains cycle-to-cycle based. b) Furthermore, an in-cycle control shall be established, which uses measurements of the current cycle in order to generate control interventions within the same cycle. This means that even if a disturbance occurs, which can cause a very large effect due to the sensitive process behavior, it is still possible to intervene in the same cycle to maintain stability.

With currently researched control concepts, it is only possible to react to this disturbance variable in the next cycle and thus a disturbance variable can lead directly to a combustion misfire with drastically increased emissions. Multiscale control thus allows a more direct control of the combustion process over time, with which the combustion stability and efficiency can be positively influenced and the emissions can be reduced. In order to realize multi-scale control, new fundamental research questions must first be clarified. These concern the development of the necessary quantitative basic understanding of combustion technology with regard to the possibilities of influencing the inner-cyclical processes of the engine process. Based on this, tailor-made control engineering methods for the realization of this concept must be developed.

 

Funding

Logo of the German Research Foundation